Fast charging with your existing grid connection

Van commerciële locaties tot projecten op netniveau: de batterijopslagsystemen van Cactos maken slimmer energieverbruik overal mogelijk.

See how it works

Cactos boosts charging at

Faster charging, better experience

Open and expand charging sites faster
Does your grid connection limit charging? A bigger connection takes time and money, or may not be available at all. By adding a battery energy storage, you can open and expand your charging sites without upgrading your grid connection.
Enable faster charging, get happier customers
By integrating energy storage into your charging infrastructure, you can offer more power and faster charging to customers, even during rush hours. More sold kilowatt-hours for you, better experience for your customers.
Earn higher margin for sold energy
Most driving happens during the day, so charging demand peaks when electricity prices are often high. Cactos charges its batteries when energy is affordable, so you can use stored energy during pricier periods and improve your margin.

When the grid limits, Cactos helps

When many cars charge at the same time, they need to share the available power. When this happens, the Cactos energy storage system automatically discharges energy for your chargers. Your customers enjoy faster charging times and you sell more kilowatthours.

For example, if your charging station dynamically shares 300 kW across four chargers, each vehicle would receive 75 kW. By adding a Cactos Mylo energy storage unit, all four cars could get 140 kW.

Cactos Mylo boosting charging site power

Hoe Cactos je helpt

Charge point operators
Krijg meer vermogen wanneer je het nodig hebt, zonder je netaansluiting te verzwaren.
Heavy transport
Charge within tight turnaround windows and keep every route on schedule. We helped Wibax to secure up to 400–450 kW charging power with limited grid capacity.
Retail and destination
Offer fast charging that brings customers in, without a bigger grid connection. Cactos helps all EV charging sites, big or small, to optimize charging.
OK logo

OK chooses Cactos to supply battery storage for its Danish station network

OK is installing Cactos batteries at its charging stations across Denmark to add power without waiting in the grid connection queue. The first systems were installed in October, with new ones following every month. The goal is 70 systems by the end of 2027.

"We were looking for a battery partner, not just an equipment supplier. It was important to us that the battery systems are designed and manufactured in Europe and that all the expertise sits within one company."

Mads Bolkjær Winther
Mads Bolkjær Winther
Senior Director of Product Management B2B

Batteries for better charging

Cactos Nevado

MYLO

Modular energy storage built for charging sites

Mylo is a liquid-cooled battery energy storage engineered to boost high-power EV charging. For larger sites, multiple units can be installed in parallel to achieve the required system power.

Capacity: 520 kWh
Power: 260 kVa

nevado

Modular energy storage for megawatt charging

Nevado is a liquid-cooled energy storage system for large-scale projects on medium-voltage connections. It is available in three versions, starting with a power of over 2 MW and a capacity of over 4 MWh per unit.

Capacity starting at: 4.18 MWh
Power starting at: 2.09 MVa
Cactos Nevado
Cactos Steno

Steno

Modular energy storage for smaller sites

Steno, the more compact battery energy storage, is suitable for smaller sites with a few fast-chargers requiring less extra power.

Capacity: 240 kWh
Power: 92 kVa

Features and technical specifications

Steno
Mylo
Nevado 2.1
Nevado 3.3
Nevado 4.4
Features
Smart load shifting
✔
✔
✔
✔
✔
Storage of locally produced energy
✔
✔
✔
✔
✔
Peak shaving
✔
✔
✔
✔
✔
All maintenance and updates
✔
✔
✔
✔
✔
‍
24/7 monitoring and control
✔
✔
✔
✔
✔
Ability to participate in electricity markets
✔
✔
✔
✔
✔
Steno
Mylo
Nevado 2.1
Nevado 3.3
Nevado 4.4
Technical specifications
Battery capacity
240 kWh
520 kWh
4,180 kWh‍
6,688 kWh
9,196 kWh
Battery modules
LiFePo4
LiFePo4
LiFePo4
LiFePo4
LiFePo4
Charging and discharging power
92 kVA
260 kVA
2,090 kVA
3,290 kVA
4,390 kVA
Cycle life
8,000 cycles, 70% SOH (25 °C)
8,000 cycles, 70% SOH (25 °C)
8,000 cycles, 70% SOH (25 °C)
8,000 cycles, 70% SOH (25 °C)
8,000 cycles, 70% SOH (25 °C)
Battery management system
Cactos BMS
Cactos BMS
Cactos BMS
Cactos BMS
Cactos BMS
Permitted operating temperature
-30 – 45 °C
-30 – 45 °C
-30 – 45 °C
-30 – 45 °C
-30 – 45 °C
Dimensions H x W x D
2,580 x 2,480 x 1,570 mm
2,550 x 2,700 x 1,520 mm
Batteries: 1,650 × 10,282 × 3,135 mm
‍
Inverter: 3,500 x 2,000 x 2,200 mm
‍
Transformer: 2,655 × 5,200 × 2,520 mm
Batteries: 1,650 × 13,683 × 3,135 mm
‍Inverter: 3,500 x 2,000 x 2,200 mm
‍Transformer: 2,655 × 5,200 × 2,520 mm
Batteries: 1,650 × 18,783 × 3,135 mm
Inverter: 3,500 x 2,000 x 2,200 mm
‍Transformer: 2,655 × 5,200 × 2,520 mm
Total weight
3,000 kg
6,000 kg
Batteries: 42,500 kg
‍Inverter: 5,200 kg
Transformer: 5,500 kg
Batteries: 68,000 kg
Inverter:
5,350 kg
Transformer:
6,850 kg
Batteries: 93,500 kg
Inverter:
5,500 kg
Transformer:
8,200 kg
Enclosure protection rating
IP 54
IP 54
IP 65
IP 65
IP 65
Grid voltage
400 V
400 V
20 kV
20 kV
20 kV
Grid frequency
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
Recycling
Cactos is a member of Recser and charges statutory recycling fees on a pass-through basis.
Cactos is a member of Recser and charges statutory recycling fees on a pass-through basis.
Cactos is a member of Recser and charges statutory recycling fees on a pass-through basis.
Cactos is a member of Recser and charges statutory recycling fees on a pass-through basis.
Cactos is a member of Recser and charges statutory recycling fees on a pass-through basis.

Why Cactos?

Works with your chargers
Our batteries and your chargers work as one. Cactos tells each charger how much power it can deliver, so your grid connection is never overloaded.
Open system, no vendor lock-in
Buy just the batteries and use your own charging backend, energy management system or trading partner, or let us operate and optimize them for you.
Proven at numerous charging sites
We already work with many charging customers across the Nordics, from fuel stations to truck hubs, and our charger integrations are in daily use.
A partner, not just a vendor
Work directly with the people who designed and built the system. We develop it together with you, so it fits your needs.
Choose technology made in Finland
Cactos systems meet IEC 62443 standard and are designed and manufactured in Finland. There is no involvement from external parties.
Maintained by the people who built it
Cactos operation and maintenance is available whether you buy hardware or the full system, so your batteries keep performing year after year.

Let's talk charging

Is your grid connection holding back your charging plans? Tell us about your sites, and we'll work out the best setup with you.

Your point of contact
Saku-Matti Mäki
Janne Blessing
‍
Sales Manager
+45 27 62 70 04
firstname.lastname[a]cactos.fi
Your point of contact
Janne Blessing
‍
Sales Manager
+45 27 62 70 04
firstname.lastname[a]cactos.fi

120+ MWh

Installed BESS capacity

300+

Installed systems

Made in Finland

From modules to operation

Nordic partner from start to finish

Cactos systems are designed and built at our factory in Kempele, Finland, from battery modules to the last line of code. Our systems and software follow the IEC 62443 cybersecurity standard for industrial control systems.

FAQ

Olipa kiinteistösi millainen tahansa, jokainen päivä energiamaailmassa on erilainen. Alla kerrotut hyödyt auttavat sinua suunnistamaan sähköverkossa säästäen samalla aikaa, energiaa ja rahaa. Ja vieläpä automaattisesti, sillä asiakkaana sinut ei tarvitse puuttua järjestelmän toimintaan, Cactos Spine tekee sen sinun puolestasi.

Do I still need a bigger grid connection?

Often not. The battery adds power on top of your existing connection, so you can run more chargers at full speed without waiting for an upgrade.

How does the battery work with my chargers?

Cactos batteries integrate with your chargers, so they work as one. For example, we can set a maximum power to draw from the grid, and any extra power your site needs comes from the batteries. If the batteries can’t deliver their full power, your chargers are told and won’t ask for more than is available, so the connection is never overloaded. The integration is already running at many charging sites.

Can I buy only the hardware and run it with my own backend?

Yes. You can take the full system with Cactos software and operation, or buy the hardware and run it in your own system.  Maintenance by us is available in both cases.

What size system do I need?

We size every system around your site, grid connection, charging power needs, and how you want to optimize energy costs. Cactos Mylo fits most EV charging sites, while smaller sites with a few fast chargers can start with Steno. For the largest hubs, Nevado is often the best fit, depending on the grid connection.

Geef jouw onderneming de energie

Wil je zien hoe Cactos aan je behoeften kan voldoen of direct een offerte aanvragen?